How to Use Rufus to Create a Bootable USB Drive

How to Use Rufus to Create a Bootable USB Drive

How to Use Rufus to Create a Bootable USB Drive


A bootable USB drive is basically a regular portable flash drive with a certain amount of storage space, which enables you to store an ISO image on it. When you need to boot your PC or laptop, you can use a bootable USB drive to do so. This can be very handy if you don’t have a CD drive present on your computer or laptop. In order to use Rufus to create a bootable USB drive, you need to download the program from its official website.


To use Rufus, you need to follow the instructions given by the website.

After downloading the program, you need to connect your PC or laptop to a USB port in order to access the program. Once you are connected, click on the “Create USB Image” button and save the program. This is one of the most effective ways to create a bootable USB drive for free.


After saving the program in the USB drive, you can now use the drive to create a bootable USB drive. To do so, you should first install the required software on your computer. This software is usually included with your operating system. You should not forget to set the software as the default device drivers for your PC or laptop. By doing so, the software will allow your computer to read the bootable drive from USB.


Next, you should boot your computer into the Windows operating system to enable the Rufus software to work properly. When your computer reboots, you should insert the USB disk that contains the bootable drive. After this, the Rufus software should load and prompt you to insert the USB drive again. From here, you can choose whether you want to insert the USB drive as a bootable hard drive, a blank drive, a portable drive or a recovery drive.


The drive will be converted into the appropriate format and the program will then copy all the data on the disk onto the new drive. This is one of the easiest and fastest ways to make a bootable USB drive.


To make sure that you make the bootable USB drive, make sure that the USB disk is not formatted as NTFS or FAT. Both of these formats require the use of an external storage device such as a hard drive or USB external disk. If you choose to use FAT, you can expect your PC or laptop to take a while to read the bootable data.


Once the conversion has finished, you can safely erase the existing data stored on the USB drive.

After doing so, you can remove the bootable CD or DVD from your CD tray and insert the new drive in it. Your new USB drive should automatically detect the new drive and start working as a bootable drive.


The last step involves making an ISO file of the CD/DVD to use to boot your PC or laptop. You can use Rufus to create a bootable CD/DVD to install your operating system on your external drive and to make an alternate bootable drive if you have lost the original disk. using this technique you can create two separate copies of the operating systems.


After your PC boots up, you can then insert your original drive or USB CD or DVD and choose to boot up your computer with the CD/DVD containing your operating system. The boot menu should appear and allow you to choose to boot with the hard drive or portable drive or with the new hard drive. Once you have selected which type of boot option you would like to use, you can then insert the CD/DVD into your USB drive. to create a bootable USB disk.


The above steps should be followed to use how to use Rufus to create a bootable USB drive.

but there are a few additional steps that should be considered in order to make sure that you create the right bootable USB drive. that can be used to keep the operating system operating after it is erased from the hard drive or portable drive.


The first step is to make a backup of your operating system before you edit the registry. You should also backup the registry before you erase your operating system. and you should make the backup before creating the bootable USB drive.


Leave a Reply

Your email address will not be published. Required fields are marked *